Plasma Cutter Roller Guide


 Plasma Cutter Roller Guide / plasma cutter circle guide

Will Fit LG 40 & PT 31 Plasma Torches

A standard plasma cutter that most home
workshops have is the smaller 40/50 amp single phase plasma cutting machines such as mitech cut 40 plasma cutter, rilon cut 40, smoothcut 40 plasma cutter, or similar  a lot of theses smaller plasma cutting machines use a generic plasma torch such as the PT 31.

In many parts of the word the PT 31 is sold as the
LG 40.mitech cut 40 plasma cutter

These easy to use plasma cutter torches with very good priced consumables and are a must have for most workshops.

SKU: N/A Category:

The easy to handle plasma cutter circle guide makes it
easy for the welder to cut out circles out of a metal sheet. However,
getting exact circles can be a difficult task to achieve free hand.

Even with
a circle drawn onto the metal, the force of the plasma torch can shake the
hands of the user.

To avoid the errors caused by cutting freehand circles just use this
plasma cutter guide kit.

The plasma cutter roller guide
acts as a compass that guides the torch on the correct circular path.

The PT 31/ LG 40 cutting torch guide attachment
using high-quality materials that makes the product highly durable.

Gold and silver are the combinations of colors that the PT 31 / LG 40 plasma torch guide comes

When  ordering your plasma wheel guide, you will receive one plasma torch roller
guide wheel which is compatible with both the PT 31 and the LG 40.

On receiving the item, you can check for
the following parts to ensure that you have received a functioning product:

Rotating torch cap holder
the cap holder is where the plasma head is to be affixed. The plasma electrode
should stick out of the bottom of the torch cap holder for the metal to be cut.

  • Two wheels– cutting torch guide wheels
    are to be attached to the top and bottom of the rotating torch cap
    holder. It is the wheels that move, allowing the torch cap head to move and cut
    the metal

11-inch rod– the rotating
torch cap is attached to the arm by the base wheel. The rod acts as an arm
that attaches the fulcrum to the cap holder. You can even buy a longer 15-inch
arm if you need a bigger plasma cutter circle jig.

  • Centre pin-
    the center pin is the adjustable part of the plasma cutter roller guide. Acting as the
    fulcrum, the center pin remains fixed at the center point of the circle. The
    rotating torch cap holder makes the plasma head move and cut the nearly perfect
    circle. A holder holds the center pin in place on the arm.

 To use the plasma cutter roller guide

  1. Draw a circle using a compass and a marker onto the metal.

  1. Attach the plasma cutter circle jig to the plasma cutter head. Use a lengthen
    cutting nozzle electrode.

  1. Make a small hole through the center of the circle.

  1. Fix the center pin at the center of the circle.

  1. Adjust the guide to ensure that the plasma head is right over the circle

  1. Start cutting the metal.

Cutting out a perfect circle from a
metal sheet is as easy as attaching the guide to the plasma torch head. The PT
31/ LG 40 roller guide is only compatible with these specific plasma torch
heads. Check your torch head model before ordering the compatible plasma cutter
circle guide wheel.

Torch Guides & Consumables

Pt31 / Lg 40 Plasma Cutter Roller Guide, Pt 31/Lg 40 Consumable kit, Replacement Pt31/Lg40 Torch, P80 Torch Roller Guide